HPF STAGE 5 | 515KW

$26,395.00
Product Code: #300C 6.4L HPF STAGE 5 | 515KW |
Install Time: 5 Days
Model Compatibility: 300 SRT 6.4L
Note: This product can only be fitted at Diesel Tune Australia

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
350kW
469hp
515kW
691hp
+165kW
+221hp
TORQUE
637Nm
470ft-lb
860Nm
634ft-lb
+223Nm
164ft-lb
POWER
STANDARD 350 KW
469 hp
DYNO CHIPTUNING 515 KW
691 hp
DIFFERENCE +165 KW
221 hp
TORQUE
637 Nm
470 ft-lb
860 Nm
634 ft-lb
+223 Nm
164 ft-lb

300 6.4L | HPF STAGE 5 | 515KW

The new Chrysler 300 SRT 6.4L Stage 5 upgrade starts with our trained technician fitting a Whipple 3.0L Twin screw supercharger Kit, with a high flow cold air intake system to increase the engine's breathing capabilities. We also fit a set of Brisk spark plugs and a colder thermostat for optiomal engine performance. We then fit Pacemakers 4-1 stainless steel extractors, high flow metallic cats & a dual 3" stainless steel catback exhaust to increase the engine's breathing capabilities. We then custom tune your vehicle's ECU on the dyno utilizing the latest ECU tuning software to maximize power and fuel efficiency.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicles performance and driveability. This is all completed in a week and at the end of this upgrade you will provided with a dyno graph detailing the power & torque increase of your vehicle.

Package Includes

1 x 3.0l Whipple twin screw supercharger kit
1 x Whipple water to air intercooler system
1 x Whipple high flow cold air intake
1 x Fuel Pump Voltage Booster
16 x High Performance Spark Plugs
1 x Whipple Self Draining Catch Can
1 x Custom ECU- reprogram
1 x Before and after dyno graph
1 x All labour to fit/tune/test

Important

HPF Recommends a forged piston and con rod engine upgrade with this package. This product is special order- typically requires 6-8 weeks lead time.

Key Features

Huge power gains, power and torque from idle all the way to the redline! Oh... and blower noise and exhaust noise!! Build your own Hellcat!

Notes

This Product is special order - Typically Requires 6-8 Weeks lead time.

  • Power figures are estimates only and actual figure's may vary.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only

Enquire Here