HPF STAGE 1 | 260KW

EVO X | HPF STAGE 1 | 260KW

The EVO X Stage 1 upgrade starts with our trained technician fitting a high flow air filter to increase the engine's breathing capabilities. We then tune your vehicle's ECU on the dyno, maximizing all parameters including boost control, fuel, ignition timing, idle and enabling automatic water spray on all manual cars as from factory this set to only work when engine temp is above 105deg.

We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the HPF upgrade has made to your vehicle.

Package Includes

1 x Before dyno run
1 x High flow air filter
1 x ECU reprogram-factory ECU
1 x Labour to fit, tune and test

Key Features

Good power gains, very noticeable power and torque increase across the board, with zero down sides.

Notes

• We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
• *Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
• Modifications such as this package require the vehicle to be in excellent mechanical order.
• We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
• Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
• Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
• Images are for illustration purposes only.

Enquire Here