STAGE 2 | 165KW

$4,385.00
Product Code: #HILUX 2006-2015 D-4D STAGE 1 TOW | 165KW
Install Time: 1 Day
Model Compatibility: Hilux 2006-2015 D-4D 3.0L
Note: This product can only be fitted at Diesel Tune Australia

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
120kW
161hp
165kW
221hp
+45kW
+60hp
TORQUE
343Nm
253ft-lb
530Nm
391ft-lb
+187Nm
138ft-lb
POWER
STANDARD 120 KW
161 hp
DYNO CHIPTUNING 165 KW
221 hp
DIFFERENCE +45 KW
60 hp
TORQUE
343 Nm
253 ft-lb
530 Nm
391 ft-lb
+187 Nm
138 ft-lb

HILUX 2006-2015 D-4D 3.0L | STAGE 2 | 165KW

The Hilux D-4D 3.0L Stage 2 upgrade is ideal for vehicle's towing heavy loads and includes the fitment of a larger front mount intercooler.

The upgrade package starts with our trained technician fitting a Process West front mount intercooler as the standard intercooler is logically positioned at the front of the vehicle, but the sizing of the intercooler and the unreliability of the intercooler hoses are not ideally suited for sustained hard driving or towing. s such we recommend a new heavy duty, larger capacity intercooler and piping kit. The much larger intercooler is more able to control the heat generated when towing or off-roading and the silicone intercooler hoses are significantly stronger than the factory rubber hoses thus maintaining the engine's power and reliability in all situations. The intercooler is a worthy consideration with the turbocharger upgrade as we have seen a 40 degree drop in intake temperatures after installation.

We also fit a Process West SEPR8R air oil separator to capture oil mist entering your engine's inlet manifold which can build up in your engine's intake and cause a carbon build which can reduce reliability and performance over time.

We complete the package by custom tuning your vehicle's ECU on the dyno in real time utilizing the latest ECU tuning software to maximize power, torque and fuel efficiency and testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the upgrade has made to your vehicle.

Package Includes

1 x Process West front mount intercooler and piping
1 x SEPR8R air oil separator
1 x Custom ECU reprogram
1 x Before and after dyno graph
1 x Labour to fit, tune and test

Key Features

The Stage 2 package addresses the next level of components that limit power; generally this will be an intercooler and associated hardware upgrade. The intercooler upgrade is aimed at maintaining our ‘reliability first protocol’ which maintains safe air fuel ratios and low EGT’s. You will note that the Stage 2 package may not include what is traditionally thought to be ‘essential diesel upgrades’ but rest assured, if it’s needed, it will be in the Stage 2 package.

Notes

  • Important - Manual transmission vehicles will require a clutch upgrade to handle the additional torque.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos and are based on a automatic vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.

Enquire Here