STAGE 3 | 200KW

$9,125.00
Product Code: #HILUX N80 2.8L 2015 to 2020| STAGE 3 | 200KW
Install Time: 2 Days
Model Compatibility: Hilux N80 2.8L 2015 to 2020
Note: This product can only be fitted at Diesel Tune Australia

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
130kW
174hp
200kW
268hp
+70kW
+94hp
TORQUE
450Nm
332ft-lb
600Nm
443ft-lb
+150Nm
111ft-lb
POWER
STANDARD 130 KW
174 hp
DYNO CHIPTUNING 200 KW
268 hp
DIFFERENCE +70 KW
94 hp
TORQUE
450 Nm
332 ft-lb
600 Nm
443 ft-lb
+150 Nm
111 ft-lb

HILUX N80 2.8L 2015-2020 | STAGE 3 | 200KW

The Hilux N80 Stage 3 starts with our trained technician fitting a Gturbo GD-G250 turbocharger upgrade as one of the limiting factors when upgrading the 2.8L engine is the size of the standard turbocharger which dictates the peak power and torque the engine is capable of.

We then replace the restrictive factory exhaust with a larger high flow Pacemaker exhaust system to also increase the engine's breathing capabilities. We also fit a Process West SEPR8R air oil separator to capture oil mist entering your engine's inlet manifold which can build up in your engine's intake.

We complete the package by custom tuning your vehicle's ECU on the dyno in real time utilizing the latest ECU tuning software to maximize power, torque and fuel efficiency and testing your vehicle on the road to make final adjustments, optimizing your vehicle's performance and driveability. At the end of this upgrade we will provide you with a dyno graph comparing the before and after power & torque increase the upgrade has made to your vehicle.

Package Includes

1x HPF custom dyno tune
1x Process West Sepr8r catch can
1x Gturbo GD-G250 turbocharger (change over)
1x Process West front mounted intercooler
1x Pacemaker DPF back exhaust system
1 x Labour to fit, tune and test

Key Features

The Stage 3 package addresses the next level of components that limit power; generally this will be a turbocharger and associated hardware upgrade. The turbocharger upgrade is aimed at increasing air flow into the engine; this allows extra fuel to be added for more power and torque throughout the rev range. We still maintain our ‘reliability first protocol’ which maintains safe air fuel ratios and low EGT’s. You will note that the Stage 3 package may not include what is traditionally thought to be ‘essential diesel upgrades’ but rest assured, if it’s needed, it will be in the Stage 3 package.

Notes

  • Please contact us for 2021 Models & Above
  • Important - Manual transmission vehicles will require a clutch upgrade to handle the additional torque.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only.

Enquire Here