HPF STAGE 3 | 380KW

$18,990.00
Product Code: #RAM 1500 HPF STAGE3 | 380KW
Install Time: 5 Days
Model Compatibility: RAM 1500 5.7L Including E-Torque
Note: This product can only be fitted at Diesel Tune Australia

Share:

STANDARD
DYNO CHIPTUNING
DIFFERENCE
POWER
295kW
396hp
380kW
510hp
+85kW
+114hp
TORQUE
556Nm
410ft-lb
645Nm
476ft-lb
+89Nm
66ft-lb
POWER
STANDARD 295 KW
396 hp
DYNO CHIPTUNING 380 KW
510 hp
DIFFERENCE +85 KW
114 hp
TORQUE
556 Nm
410 ft-lb
645 Nm
476 ft-lb
+89 Nm
66 ft-lb

RAM 1500 5.7L HPF STAGE 3 | 380KW

The new RAM 1500 5.7L Stage 3 upgrade starts with our trained technician fitting a comprehensive camshaft and lifter package. This is optimised with the addition of a full Manta exhaust system comprising of 4 into 1 headers and high flow cats along with a 3 inch stainless steel cat back exhaust. We then bring it all together by custom tuning your vehicle's ECU on the dyno utilizing the latest ECU tuning software to maximize power and fuel efficiency.
We complete the upgrade process by testing your vehicle on the road to make final adjustments, optimizing your vehicles performance and driveability. This is all completed in a week and at the end of this upgrade you will provided with a dyno graph detailing the power & torque increase of your vehicle.

DOES NOT SUIT E-Torque variants.

Package Includes

1 x Set Of Head Gaskets
1 x Set Of Head bolts
1 x Set of Hellcat lifters and guides
1 x Performance replacement camshaft
1 x Timing cover o-ring
1 x Water pump o-ring
1 x Engine oil & filter
1 x Coolant
2 x Exhaust manifold gaskets
1 x Balancer bolt
1 x Cam bolt
1 x Set Of DOD delete plugs
1 x Wheel Alignment
1 x Custom ECU - reprogram and unlocking (pre 2019 models minus $550)
1 x Before and after dyno graph
1 x All labour to fit / tune / test

Key Features

Key Features:

  • Great power upgrade with lumpy cam idle
  • NOT available for E-Torque variants

Notes

  • *Please note: Power figures are estimates only and actual figure's may vary.
  • NOT available for E-Torque variants.
  • We recommend all vehicles coming to HPF for tuning run 98 Octane fuel. Please contact us if you have a need to use different fuel.
  • Power figures listed are estimated kilowatts at the flywheel based on results typically obtained by HPF on HPF’s dynos. Typically these are based of a manual vehicle with standard driveline and standard wheels and tyres. Actual power can vary based on each specific vehicle.
  • Modifications such as this package require the vehicle to be in excellent mechanical order.
  • We advise against increasing the power output substantially on high kilometer engines, if your engine has in excessive of 150,000kms please contact us to discuss options.
  • Whilst every attempt is made to ensure prices listed online are correct, they are subject to change at any time.
  • Additional parts may be required in some cases depending on the condition of the vehicle. Cost of these parts and additional labor required may incur additional cost.
  • Images are for illustration purposes only


Enquire Here